Stoney CNC present the Axiom AR SF specifications for the Axiom CNC router machine, a small-format, cost-effective production router, available from Stoney CNC.
Tel: +44(0)1432607908 | Mob: +353(0)877616324

AXIOM AR SF Specifications

STONEYCNC AXIOM AR4+ AR6+ AR8+ AXIOM specifications
Travel in X axis 610mm
Travel in Y axis AR4 = 610mm | AR6 = 915mm | 1220mm
Travel in Z axis 153mm
Overall footprint AR4 = 995L x 950W x 770H (mm)
AR6 = 1300L x 950W x 770H (mm)
AR8 = 1600L x 950W x 770H (mm)
Dimensions when shipped crated AR4 = 1070 x 990 x 840 (mm)
AR6 = 1347 x 990 x 840 (mm)
AR8 = 1651 x 990 x 840 (mm)
Machine weights AR4 = 120 kg
AR6 = 135 kg
AR8 = 150 kg
Bottom of collet to Tslot table height 165mm
Rapid Feed rate 5000mm/min (83mm/sec) in XY
2000mm/min (33mm/sec) in Z
Spindle Options High power water cooled HF spindle | Single phase KRESS spindle
Software Compatibility Ethernet controller running UCCNC software
Drive system Electronics high power stepper motors
Limit and homing sensors Inductive sensors running on 12V DC on XY and Z
Drive system 16mm Ballscrew drives on XY and Z | Repeatability within 0.05mm
Thrust support Double angle contact bearings preloaded at thrust end of ballscrew support
Linear motion system Profiled linear rails on all axes.
Cable management Full cable management on all axes
Core components Steel base | Cast Y cross member and up stands | Custom Aluminium extrusion bridge
Machine bed Tslot table with integrated MDF spoil-board as standard
Tool lenght sensing Configured for conductive tool touch off sensing