All the JKR machines are designed so that they can be easily handled and moved. Moving a CNC router of this size is the most common way to damage a machine.
The machines can be supplied with manual tool change and quick tool change manual collets systems. This makes the machine more affordable and can still be a very versatile system
The dust shoe is fully adjustable and floats independent of the spindle. The show can be set to the height of the work
The machines are configured with fully automated Z touch off sensor. The sensor can be supplied in manual mode (where no air is needed) or in full auto mode where air drops down the sensor and retracts after probing. The probe is used to reference Z off the top of the work
Every JKR CNC router machine is supplied with a tool datum setup sensor. The sensor is used as the reference plane to set-up all the tools in the machines magazine. All tool setups are one click automated from the main controller screen
The JKR CNC router can be fitted with a side loading mechanism. The bridge extends out over the side of the table and allows sheets to be loaded and milled on their edges.
We run dual tables split half and half accross the machine. Each table has 70 zones as well as the standard grooves to place the rubber isolation strips. Each table has its own pump and the zones can be enables and disabled easily with blanking discs. You can focus all of a pumps pressure on a 400 x 400mm section of table.